China 100HP 4WD Popular Luxury Cabin Four Wheel Tractors double knuckle pto shaft

Item Description

100HP 4wd with luxury cabin Four wheel tractor

one. Normal configuration:
Fitted with YTO, Yucahi, or Lovol-  4 Diesel motor, electricity steering, dual clutch, 2 rear hydraulic remote controls, 16+8 collar shift creeper gears, enclosed enthusiast taxi, outer air filter, luxurious seat, merge meter, PTO540/1000rpm, agri tyres eleven.2-24/sixteen.9-34,

two. Optional devaice:
Air conditioning, heater, sunroof, rops, entrance and rear ballast, air brake, paddy tyre, large tyres, 8+4 gears, 540/760 or 760/one thousand rpm PTO, substantial strain system for lifter, swing drawbar

3. Advantages and Attributes of Qianli 90 Collection tractors:

Equipped with famous brand name engine displaying advanced potential, low gas consumption and large economic efficiency.

Reasonable distribution of velocity, higher efficiency in each farm working and transportation.

150L enlarge fuel tank, guaranteeing long doing work time.

Double cylinder Powerful take-up gadget, with height limit, robust lift force, trustworthy and substantial efficiency.
Set up renowned manufacturer Clutch, reliable and sturdy.

16F+8R creeper shift-gears or 16F+8R shuttle shift-gears, the shifts matched sensible, have a good agricultural adaptability.

Optional double pace PTO (Power Take Off): 540/a thousand, 760/1000r/min demonstrating large working efficiency.

Optional PTO shaft of 6 Spleen, 8 Spleen or 24 Spleen, adaptable for agricultural tools of all more than the planet.

Streamlined appearance style, beautiful and generous.

Optional luxurious closed drivers cabin, can be outfitted with air-conditioner, heater, CD player, radio, adjustable soft seat, luxury interior decorations and so forth.

four. Our promise:
Quality 1st, credit score topmost
Price benefit
Ocnvenient one particular-end perchase

5. Designs of Qianli Farm Tractors
1) QLN-180 tractor, 18HP 2WD, with 1-cylinder diesel engine
two) QLN-184 tractor, 18HP 4 wheel drive, with 1-cylinder diesel engine
three) QLN-two hundred tractor, 20HP 2WD, with 1-cylinder diesel motor
four) QLN-204 tractor, 20HP Four wheel drive, with 1-cylinder diesel motor
five) QLN-224 tractor, 22HP Four wheel drive, with 3-cylinder diesel engine
6) QLN-250 tractor, 25HP 2WD, with 2/3-cylinder diesel motor
7) QLN-254 tractor, 25HP 4wd, with 2/3-cylinder diesel motor
eight) QLN-300 tractor, 30HP 2WD, with 3-cylinder diesel motor
9) QLN-304 tractor, 30HP 4 wheel drive, with 3-cylinder diesel motor
ten) QLN-350 tractor, 35HP 2WD, with 4-cylinder diesel motor
eleven) QLN-354 tractor, 35HP 4 wheel drive, with 4-cylinder diesel motor
twelve) QLN-four hundred tractor, 40HP 2WD, with 4-cylinder diesel motor
thirteen) QLN-404 tractor, 40HP 4 wheel drive, with 4-cylinder diesel engine
fourteen) QLN-450 tractor, 45HP 2WD, with 4-cylinder diesel engine
15) QLN-454 tractor, 45HP 4 wheel drive, with 4-cylinder diesel engine
sixteen) QLN-five hundred tractor, 50HP 2WD, with 4-cylinder diesel motor
seventeen) QLN-504 tractor, 50HP 4 wheel drive, with 4-cylinder diesel engine
eighteen) QLN-550 tractor, 55HP 2WD, with 4-cylinder diesel engine
19) QLN-554 tractor, 55HP 4wd, with 4-cylinder diesel motor
twenty) QLN-600 tractor, 60HP 2WD, with 4-cylinder diesel engine
21) QLN-604 tractor, 60HP Four wheel drive, with 4-cylinder diesel engine
22) QLN-650 tractor, 65HP 2WD, with 4-cylinder diesel motor
23) QLN-654 tractor, 65HP Four wheel drive, with 4-cylinder diesel engine
24) QLN-700 tractor, 70HP 2WD, with 4-cylinder diesel motor
twenty five) QLN-704 tractor, 70HP 4wd, with 4-cylinder diesel engine
26) QLN-750 tractor, 75HP 2WD, with 4-cylinder diesel motor
27) QLN-754 tractor, 75HP Four wheel drive, with 4-cylinder diesel motor
28) QLN-804 tractor, 80HP 4 wheel drive, with 4-cylinder diesel motor
29) QLN-850 tractor, 85HP 2WD, with 4-cylinder diesel engine
30) QLN-854 tractor, 85HP Four wheel drive, with 4-cylinder diesel motor
31) QLN-900 tractor, 90HP 0WD, with 4-cylinder diesel motor
32) QLN-904 tractor, 80HP 4wd, with 4-cylinder diesel engine
33) QLN-954 tractor, 95HP 4 wheel drive, with 4-cylinder diesel engine
34) QLN-1004 tractor, 100HP 4wd, with 4-cylinder diesel motor

Technical parameter for this 100HP 4wd farm tractor

Product HH-a thousand/1004
Dimensions Length×Width×Height(mm) 4280×2085×2925
Wheel Tread(mm) Entrance Wheel(mm) 1610-1820(4 wheel drive)  1520-1820(2WD)
Rear  Wheel(mm) 1620_2571
Min.Floor Clearance(mm) 370-450
Dry Mass With Taxi(kg) 3635(2WD)  3785(Four wheel drive)
Without Cab(kg) 3420(2WD)  3570(4wd)
Engine Trade Mark or Manufacturer YTO/YUCHAI
Engine Model Vertical H2o Cooled 4-stroke
Directly Injection
Amount of Cylinder 4
Cooling Method Kind Water Cooled
Rated Electrical power(kw) 73.5KW
Max. Torsion(N.M) 395
Rated Pace(r/min) 2300 or 2400
Gas Tank Volume(L) 150
Transmission System Clutch Single,Dry,Dual Phase Kind
Gear Box F16+R8/F16+R8(creeper equipment)
Differential Closed 4-planetary Gears
Differential Lock Mechanical Sliding Sleeve
Braking Method Damp Double Plate Disc Brake  
Running Program Tyre Model F/R(2WD) 6.5-20/sixteen.9-34 
F/R(Four wheel drive) eleven.2-24/sixteen.9-34
Steering Method Hydraulic Wheel Steering  
Working Device Hydraulic System Type Positive lifter
Linkage Variety II Rear Mount 3-level Linkage
PTO(Normal) φ38,8teeth φ35,6teeth
PTO Velocity(r/min) 540/one thousand
Drawbar Kind Fixed Drawbar/Swing Drawbar
Optional configuration 
Cab AC Heater Air-brake
Adjustable Seat Several Unit Valve ROPS Sunvisor
Double Crush Lifter Radio CD Player Paddy Tyre
Bob-fat Frontballast 11×20=220kg  20kg/pcs  
Rearballast  2×80=160kg  80kg/pcs  
Paddy Tyre F/R eleven.2-24/12.4-24  
F/R(optional) 13.6-28/sixteen.9-34  

US $16,125
/ units
|
3 units

(Min. Order)

###

Type: Wheel Tractor
Usage: Farm Tractor
Certification: ISO, CE, CCC, ISO/TS16949
Drive Wheel: 4WD
Emission Standard: Euro II
Fuel: Gas / Diesel

###

Customization:

###

Model HH-1000/1004
Dimensions Length×Width×Height(mm) 4280×2085×2925
Wheel Tread(mm) Front Wheel(mm) 1610-1820(4WD)  1520-1820(2WD)
Rear  Wheel(mm) 1620_2020
Min.Ground Clearance(mm) 370-450
Dry Mass With Cab(kg) 3635(2WD)  3785(4WD)
Without Cab(kg) 3420(2WD)  3570(4WD)
Engine Trade Mark or Brand YTO/YUCHAI
Engine Model Vertical Water Cooled 4-stroke
Directly Injection
Number of Cylinder 4
Cooling System Type Water Cooled
Rated Power(kw) 73.5KW
Max. Torsion(N.M) 395
Rated Speed(r/min) 2300 or 2400
Fuel Tank Volume(L) 150
Transmission System Clutch Single,Dry,Dual Stage Type
Gear Box F16+R8/F16+R8(creeper gear)
Differential Closed 4-planetary Gears
Differential Lock Mechanical Sliding Sleeve
Braking System Wet Double Plate Disc Brake  
Running System Tyre Model F/R(2WD) 6.5-20/16.9-34 
F/R(4WD) 11.2-24/16.9-34
Steering System Hydraulic Wheel Steering  
Working Device Hydraulic System Type Positive lifter
Linkage Type II Rear Mount 3-point Linkage
PTO(Standard) φ38,8teeth φ35,6teeth
PTO Speed(r/min) 540/1000
Drawbar Type Fixed Drawbar/Swing Drawbar
Optional configuration 
Cab AC Heater Air-brake
Adjustable Seat Multiple Unit Valve ROPS Sunvisor
Double Crush Lifter Radio CD Player Paddy Tyre
Bob-weight Frontballast 11×20=220kg  20kg/pcs  
Rearballast  2×80=160kg  80kg/pcs  
Paddy Tyre F/R 11.2-24/12.4-24  
F/R(optional) 13.6-28/16.9-34  
US $16,125
/ units
|
3 units

(Min. Order)

###

Type: Wheel Tractor
Usage: Farm Tractor
Certification: ISO, CE, CCC, ISO/TS16949
Drive Wheel: 4WD
Emission Standard: Euro II
Fuel: Gas / Diesel

###

Customization:

###

Model HH-1000/1004
Dimensions Length×Width×Height(mm) 4280×2085×2925
Wheel Tread(mm) Front Wheel(mm) 1610-1820(4WD)  1520-1820(2WD)
Rear  Wheel(mm) 1620_2020
Min.Ground Clearance(mm) 370-450
Dry Mass With Cab(kg) 3635(2WD)  3785(4WD)
Without Cab(kg) 3420(2WD)  3570(4WD)
Engine Trade Mark or Brand YTO/YUCHAI
Engine Model Vertical Water Cooled 4-stroke
Directly Injection
Number of Cylinder 4
Cooling System Type Water Cooled
Rated Power(kw) 73.5KW
Max. Torsion(N.M) 395
Rated Speed(r/min) 2300 or 2400
Fuel Tank Volume(L) 150
Transmission System Clutch Single,Dry,Dual Stage Type
Gear Box F16+R8/F16+R8(creeper gear)
Differential Closed 4-planetary Gears
Differential Lock Mechanical Sliding Sleeve
Braking System Wet Double Plate Disc Brake  
Running System Tyre Model F/R(2WD) 6.5-20/16.9-34 
F/R(4WD) 11.2-24/16.9-34
Steering System Hydraulic Wheel Steering  
Working Device Hydraulic System Type Positive lifter
Linkage Type II Rear Mount 3-point Linkage
PTO(Standard) φ38,8teeth φ35,6teeth
PTO Speed(r/min) 540/1000
Drawbar Type Fixed Drawbar/Swing Drawbar
Optional configuration 
Cab AC Heater Air-brake
Adjustable Seat Multiple Unit Valve ROPS Sunvisor
Double Crush Lifter Radio CD Player Paddy Tyre
Bob-weight Frontballast 11×20=220kg  20kg/pcs  
Rearballast  2×80=160kg  80kg/pcs  
Paddy Tyre F/R 11.2-24/12.4-24  
F/R(optional) 13.6-28/16.9-34  

Safety Precautions For a PTO Shaft

When you are working around PTOs, be sure to observe several safety precautions. These include removing the shield, keeping a safe distance from the machine, and avoiding entanglement. Entanglement is a serious injury that can even lead to death. Workers who are near the machine should always maintain a safe distance, especially if the speed of the machine is fast enough to entangle clothing. The speed of the PTO is usually 540 to 1,000 revolutions per minute, and the speed is enough to cause injury in a split second.
Shaft Collar

Safety precautions

One of the most important safety precautions for a PTO shaft is to make sure that it is properly guarded at all times. An unguarded PTO shaft can entanglement a worker, cause an injury, or even cause death. Operator awareness is key in preventing this hazard. Among other things, workers should not make repairs while the PTO is in use or wear loose or frayed clothing when working near the PTO. Likewise, they should read and follow instructions provided with their tractor and implement. Finally, they should use PTO shafts only for their intended purpose.
Another important safety precaution is to wear a protective gear such as a helmet and gloves before operating a PTO shaft. This type of equipment can be extremely dangerous because of its speed. A PTO shaft that is rotating at 540 rpm can travel two metres in less than a second. Damaged shielding is a common cause of entanglement, so it is important to check your machinery for damage before operating it.
When operating a tractor, PTOs should be kept clear of loose clothing. Loose clothing can easily catch on a rotating PTO shaft. Long hair or jewelry can also become entangled in a PTO shaft. It is also important to remember to secure the PTO shaft guard when the tractor is not in use. Also, never engage a PTO when the engine is off.

Types of pto shafts

PTO shafts are used in tractors and other equipment to secure the secondary gear in the tractor. They are available in different styles and sizes. These shafts are designed to withstand pressure, impacts, and tension. They may also include a shear pin and slip clutch. Before buying a new PTO shaft, make sure to check its measurements.
There are two types of PTO shafts available in an Agric rototiller. The first one has a slip clutch and the other has a shear pin safety device. In order to identify the type of PTO shaft used in a particular tractor, it is important to understand what it is used for.
There are two types of PTO shafts: the external and internal. The latter is used for larger machines, such as a lawnmower. The former is suitable for agricultural applications and is the preferred type for large tractors. The former is suitable for plowing, mowing, and shredding.
Transmission PTO shafts are the oldest type of PTO. They are connected to the tractor’s transmission. When a tractor is in gear, it stops the PTO shaft. However, when it’s not, it’s ineffective and can pose serious problems, such as when mowing. This type of PTO can also cause an overrun clutch to prevent the PTO shaft from working properly.
Shaft Collar

Reaction time

It’s important to know your reaction time when working around a power take-off (PTO) shaft. This part of the machine rotates at approximately 540 revolutions per minute and can pull in seven feet per second. Reaction time can be affected by age, physical condition, medications, lack of sleep, and stress. If you’re working around a PTO, be sure to remove any loose jewelry or other items that might interfere with your reaction time.
PTO accidents can be caused by several factors. The operator, the machine, and the environment all play a role. The operator’s physical and mental condition can also contribute to unsafe actions. For example, young operators may lack the knowledge and experience to recognize hazards. Older workers may also have slower reaction times, which can make it difficult to react quickly to slippery work areas.
Reaction time is measured as the time between a stimulus and the response. It does not include the time required to move the hand. Reaction time is a critical factor in sports, where athletes need to be quick to respond to the moves of their opponents. A good reaction time is necessary to score points.
A demonstration of the speed of a PTO shaft is a great tool to demonstrate how dangerous this part of a machine can be. To demonstrate the speed, use a 7-foot sash cord tied to a sliding collar universal joint. Select a 540-rpm PTO shaft, and a three-inch diameter shield. In one second, the rotating shaft makes nine revolutions and travels 7.1 feet. However, a cordless drill does not rotate at full speed and will take at least two seconds to wrap around the string.

Standardization

The standardization of PTO shafts in tractors is a major project. The EU Machinery Directive requires the protection of operators from rotating parts, such as the PTO. This is especially important when parts are accessible, as clothing can easily be wrapped around them, resulting in an accident. To prevent such accidents, manufacturers have begun to install non-rotating guards over the PTO drive shaft. These guards comply with the current EU good practice.
The European Standard EN 12965:2003+A2:2009 specifies the safety requirements for PTO drive shafts and their guards. It also specifies safe working practices for these components. The standard was approved by CEN on 16 September 2019. It is important to follow these regulations to ensure safe operation.
In the 1980s, a movement began among agricultural engineers to standardize the PTO shaft. The movement began because the different types of PTO shafts had not been interchangeable. A common example is the Deutz-Fendt shaft, which had become a standard for tractors.
As the power for PTO drives comes from the gearbox, the counter shaft acts as the PTO outlet. Standardization of PTO speeds makes it easier for manufacturers to design equipment to meet a specified speed. For example, a thresher is expected to run at a specific peripheral velocity of the threshing cylinder, which is a function of standard PTO speeds. This also allows designers to plan pulley arrangements with the standard PTO speed in mind.
Shaft Collar

Safety chains

The PTO shaft is an integral part of a tractor or implement, so it’s essential to secure it with safety chains. These chains are welded to both ends of the shaft and serve as backup connections between the tractor and trailer coupling point. There are several types of chains available, from domestic to metric, to meet your specific needs.
Because of the high speeds of PTO shafts, it’s crucial to protect these parts from being tangled. A single fall of a PTO shaft can cause serious injury or even death. In such an unfortunate situation, safety chains can prevent such injuries. PTO shafts are also extremely dangerous because the components can become hot while they are operating.
In addition to safety chains, operators must also be aware of the hazards that can occur when working near a PTO shaft. Unsafe behaviors, such as performing repairs while operating a machine, or wearing frayed clothing can lead to serious injury or death. In addition, all users should follow the instructions on the tractor or implement they’re using. It’s also essential to use a PTO shaft for its intended purpose.
In addition to safety chains, farmers should also ensure that the PTO drive shaft is securely attached to the tractor or implement. A broken or damaged PTO guard can be just as dangerous as an unprotected shaft. In addition, a poorly fitting PTO guard may provide a false sense of security. For this reason, it’s important to use protective clothing when operating a tractor or implement powered by a PTO.

Shield

The CZPT-Co universal fit PTO shaft shield is a simple and easy to use shield that has a patented lever release. The shield comes in two sizes, the smaller diameter shield is for shafts with a diameter of 1 5/16″ to 2 1/8″ and the larger diameter shield fits shafts of 2″ to 3 1/8″. Each shield is pre-installed with an assortment of bearings. The shield’s length is measured from the end of the yoke bearing groove to the other end.
If you’ve ever tried to work on a PTO shaft, you know that it can be frustrating. A PTO shaft shield is a safety device that covers the shaft and prevents it from rotating. These shields are also designed to be easy to connect and remove. The CZPT safety clip makes it easy to connect or disconnect the shield, and locks into place to prevent it from rotating with the inner driveshaft. The CZPT material used in RPM Transmissions driveline safety shields is strong and rigid.
Another improvement of this PTO shaft shield is the bracket that supports the two-piece PTO shaft and outer shield. The bracket is shown in FIG. 2 as an angled front view. FIG. 7 is a side elevation view of the bracket mounted to the machine tongue.
China 100HP 4WD Popular Luxury Cabin Four Wheel Tractors     double knuckle pto shaftChina 100HP 4WD Popular Luxury Cabin Four Wheel Tractors     double knuckle pto shaft
editor by czh 2023-01-09